Jagdtiger Tank Destroyer with Movable Barrel 1/35
Jagdtiger Tank Destroyer with Movable Barrel 1/35
================================ 📋 Recommended Print Settings (For Best Results) Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly. Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model. Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping. Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion. 🔧 Assembly Diagram Notes You’ll need super glue to attach all the components together. This is an early build of mine, so all the wheels need to be glued in place. If the latch connection is not firm, insert some tissue into the gap to improve the fit. The Tiger II Heavy Tank’s running gear uses a complex interleaved road-wheel mechanism, below are the installation procedures for these assemblies:
Colors: 2
Materials: PLA
Printer: Bambu Lab A1