Crash bandicoot Special crates

Introduction:Crash and Aku crates made with PLA wood :)Printing details: Layer height: 0.16mmMaterial: Prusa PETG: Bambulab PLA Wood Clay and lots of PETG.HOW TO PRINT THE LOGOS WITH ONE AMS?First, download the .3mfs for the head and Aku logos as shown below: AKU PAUSE 1Then add a pause at layer 14 as shown in the screenshot below, during that pause you will switch the following filamentsBrown -> Green [CHANGE]Black -> Red [CHANGE]White -> White [NO CHANGE]Yellow -> Yellow [NO CHANGE]Your printer may be already using one of the colors, in that case set the hotend to a purging temperature, manually cut the filament using the lever, retract a bit using the extruder controls on the touchscreen, swap the filament spool, then manually feed and extrude a bit to purge the color.AKU PAUSE 2Add a pause at layer 19 as shown in the screenshot below, during that pause you will switch the following filamentsGreen -> Blue [CHANGE]Red -> Red [NO CHANGE]White -> Purple [CHANGE]Yellow -> Yellow [NO CHANGE] CRASH PAUSE 1Add a pause at layer 16 as shown in the screenshot below, during that pause you will switch the following filamentsOrange -> Red [CHANGE] Assembly:Glue the corresponding logos to their crate, I recommend CA glue, wait for the glue to set before doing the other sides :)

Colors: 1

Materials: PLA

Printer: Bambu Lab A1

View on MakerWorld