Attack On titan minion
Attack On titan minion
Recommended 3D Print Profile🔧 Printer settings:Printer: Bambu Lab X1CNozzle diameter: 0.4 mm (recommended for detail)Layer height:Standard: 0.16 mm for good detail and speed balanceHigh detail: 0.12 mm for finer features (hair strands)Perimeters: 3Infill: 15-20% gyroid (stable and efficient)Speed:Outer walls: 40 mm/s (for quality)Inner walls: 60 mm/sInfill: 80 mm/sTravel: 120 mm/sTemperature:PLA: 200°C nozzle / 60°C bedPETG: 230°C nozzle / 70°C bed (if you need better toughness)ABS: 240°C nozzle / 100°C bed (requires enclosure)🏗️ Supports:Support type: Tree supports or organic (to minimize scarring)Support overhang angle: 50°Support interface layers: Enabled (for easy removal)Support placement: Touching build plate only (if possible)🌟 Build plate adhesion:Brim: Recommended (5-8 mm) to ensure good adhesion for small contact points (feet area)Z offset: Check and adjust for good first layer squish🌀 Cooling:PLA: 100% cooling after layer 4PETG/ABS: 50% cooling to reduce warping🧱 Infill & wall strength:Infill pattern: GyroidWall line count: 3Top/bottom layers: 5🎨 Post-processing tips:If you want a smooth finish: Sand and prime before painting.For small hair details: Consider lowering layer height to 0.12 mm.
Colors: 1
Materials: PLA
Printer: Bambu Lab A1